If you’re over at a friend or family member’s house during the holidays, you might be using their bathroom for the first time. And if you happen to clog their toilet, you might encounter a worst-case scenario: they don’t have a plunger. What happens when there’s nothing you can do to hide the evidence?
For one thing, don’t panic. Cooler heads prevail after all. And all is not lost. What you can do is put together a few common household items to get you out of that tight spot. You’re going to pull a MacGyver and get yourself out of that situation right away.
Here’s what you do. Grab some dish soap, hot water and a bucket — then let chemistry take it from there. Yes, the plunger-free approach is really that easy. Here’s how to make it happen.
For more household tips, here’s how to kill mold in your washing machine, and 12 easy ways to make your mattress last longer.
Check out the bathroom for everything you need
Again, you’ll need just three supplies that can be found in almost any bathroom: soap, hot water and a vessel for transferring water to the toilet bowl. Dish soap, hot bathwater and a 5-gallon bucket work best, but if secrecy is paramount and leaving the lavatory would blow your cover, a few pumps from a hand soap dispenser and some hot sink water in a small plastic waste bin will do just fine.
First, get the water in the sink or tub running hot — like, as hot as it will get. Don’t outdo yourself — no need to boil any water. At those temperatures, you could crack the porcelain or worse, injure yourself. Just let the tap water get as hot as it can and you’ll be within range.
While you’re waiting for hot water, go ahead and clear everything off the floor — scales, bathmats… pets. You’re going to be very careful to avoid any spills, of course, but better to be safe than soggy.
Slip this inexpensive, small bottle of spray into your pocket or bag to keep whatever restroom you use smelling fresh.
Details
Careful chemistry is the answer
Your objective is to get the liquid in the toilet bowl as hot and soapy as possible, as fast as possible, without letting it overflow. This is the step that requires the most finesse.
If you’ve already tried to flush the clog down a second time and the toilet bowl is positively brimming, add the soap directly to the toilet and then pour in as much hot water as you can — if you can.
If you’ve got plenty of clearance, however, go ahead and mix up the soap and water first, then pour the soapy brew into the bowl as swiftly as you can. In a perfect storm, the heat and soap will lubricate the clog while the force of the water will push it through. That said, hopefully your reflexes are quick, because you may need to abruptly stop pouring if the clog doesn’t immediately dislodge.
A note on the soap: You really can’t overdo the soap at this point. You’re not going to agitate the solution all that much, so the bowl likely won’t erupt in a suds volcano should you go overboard with it. I’m not saying you have to pour the whole bottle of soap in there, but I’m also not saying you shouldn’t. Catch my drift?
Don’t get impatient and stir the toilet bowl
Whatever you do, you don’t need to stir it up to get the hot, soapy water blended in with the cold, dirty water that was there first. Science is going to take care of that for you via a process called osmosis. If the clog doesn’t budge after your soap-water tsunami, your next move is simply to be patient.
Most toilet backups aren’t 100% blocked, so there’s a good chance yours will drain slowly at first. Keep an eye on the water level and, as it drops, continue to add more hot water to keep it full. If the clog isn’t too stubborn, the added pressure of a full toilet bowl plus the lubricating quality of the soap should help usher the backed-up matter through pretty quickly.
Still clogged? Keep waiting
The worst-case scenario is that the clog is wedged too tightly in place and the above steps don’t push it down right away. If that happens, you don’t have to call a plumber or head to the hardware store just yet.
Try giving it some time to let that hot soapy water work on breaking up the clog. Walk away, close the bathroom door, and wait 30 to 60 minutes before you check on it again. When you do, you may be pleasantly surprised to find your problem has disappeared down the drain.
That may mean blowing your cover if you’ve been trying to unclog the toilet incognito. In that case, the best you can hope for is to not become the butt of any future jokes.
Good luck with that, too.
For more cleaning hacks, check out 14 of our favorite cleaning tools and how to speed-clean your kitchen in 15 minutes or less.
Read the full article here
